Performance Grade PG 70-10

Performance Grade PG 70-10 Bitumen Exporters

Specifications of Performance Grade Bitumen PG 70-10

Tiger Bitumen Company has the capability to Export and Supply the Performance Grade Bitumen PG 70-10 in compliance with National and International standards.

PG 70-10 Bitumen Specifications
Property PG70 Test Method
10
Average 7-day maximum pavement Design Temperature, °C <70
minimum pavement Design Temperature, °C > -10
Original Binder
Flash Point Temperature Minimum °C 230 AASHTO T48
Viscosity maximum 3 Pa.s, Test Temperature,°C 135 AASHTO T316
Dynamic Shear G*/sin minimum 2.2 KPa Test Temperature,°C 70 AASHTO T315
Rolling Thin Film Oven Test AASHTO T240
Mass change maximum percent 1.00
Dynamic Shear G*/sin minimum 2.2 KPa Test Temperature, @ 10 rad/s °C 70 AASHTO T315
Pressure Aging Vessel AASHTO R28
PAV aging Temperature, °C 100(110)
Dynamic Shear G*/sin maximum 5000 KPa Test Temperature, @ 10 rad/s °C 34 AASHTO T315
Creep Stuffiness S maximum 300 Mpa m-value minimum 0.300 Test Temperature,@ 60s °C 0 AASHTO T313
Direct Tension Failure strain minimum 1 % Test Temperature @ 1mm/min, °C 0 AASHTO T314
Critical low cracking Temperature Critical cracking determined by PP42 Test Temperature 0 AASHTO PP42